This valve will control the supply of air to inlet or suction valve in a load/unload operation of a reciprocating air compressor.
Different types of solenoid valve are available on the market. Hence in Air Compressor Technology normally open (N/O) or Normally Closed (N/C) type solenoid valve is used to perform loading/unloading action.
You can also watch and Subscribe to our YouTube Channel for Engineering Educational Videos, by clicking here https://goo.gl/4jeDFu
So, Solenoid valve has three ports
How Each Port is used
Impulse air supply through a tube of Dia. not less than 12 mm from the air receiver through control filter connected to inlet port of solenoid valve.
This port is also known as cylinder port. This is connected through, at least 6 mm Dia. Copper or Nylon tube inlet (Suction) valve of the compressor.
This port is for the escape of trapped air in the line. It should always keep open to the atmosphere.
Details of Normal Open & Normal Closed Solenoid Valve
Normal Open (N/O)
These type solenoid valves allow air supply to flow from inlet port to outlet (cylinder) port, in de-energized or normal condition.
When energized, due to change over in pressure switch contact stops the air supply. This type of solenoid valve is used for load/unload operation of an air compressor.
Normal Closed (N/C)
These types of solenoid valves do not allow air supply from the inlet port to outlet port in de-energized or normal condition.
When energized due to change over in contact with pressure switch allows air supply to flow through cylinder port.
This type of solenoid valve is used in the 5-step control panel for increasing and decreasing the area of clearance pocket during unloading/loading operation of Air Compressor.
01) For the perfect functioning of the solenoid valve, always have an air filter, installed in the airline connected to a solenoid valve.
02) Always see if the nut tightening the solenoid coil is intact. If loose, tighten the top nut.
Besides this information, you are suggested to read something more from below engineering books
To get the more details about the topic, I further recommended reading
If you like the post, share it with your friends and also on social sites. Click the bluebell to subscribe